Sharp SD-AT1000W Spécifications télécharger pdf (Page 231)

Maxiva UAX

October 17, 2013

5‐51

888‐2693‐004 WARNING:Disconnectprimarypower priortoservicing.

Figure 5-37 Teraterm Ethernet Screen

Note

The IP address indicated on line (3) is the IP address for the ethernet port on the front of the LPU. The

front ethernet port on the LPU has DHCP enabled and will assign an IP address to the connected PC /

laptop.

Note

The IP address indicated on line (6) is the IP address for the ethernet port on the rear of the LPU. If an IP

address is displayed there and a connection to the rear port is desired a crossover ethernet cable must be

used. A static IP address in the same family would also have to be assigned to the PC used to access the

LPU.

STEP 8 OpenMozillaFirefoxandenterthestaticIPforthefrontethernetporthttp:/

/1 92.168.117.88.TheIn‐SystemProgramming(ISP)screenwillappearas

showninFigure5‐38.

Figure 5-38 ISP Screen

STEP 9

SelecttheBrowsebuttontonavigatetothedesired.s19softwarefile.

STEP 10 PressSubmitandwatchfortheappearanceandmovementofthe

connectingiconintheupperleftcornerofthebrowserscreen.Theaddress

bardisp laywillchangeto192.168.117.88/Sendfile.Thissteptakesabout2‐3

minutes.

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 291 292

Pas de commentaire

Sharp SD-AT1000W Spécifications Page 231