Sharp IQ-8000 Manuel d'installation télécharger pdf (Page 120)

10.3 Configuring IQ-400E VIA the TCP/IP Configurator

Use a Web Browser to configure and view the IQ-400E Configuration Information (IE 5 or greater, or

Netscape 5 or greater). You will need to know the following information, IQ0400E IP address -

192.168.168.32, Logon Name - admin, and Logon Password – PYMTF

The following steps are for connecting and changing the TCP/IP Configuration.

1. Connect your Cross Over cable from your host to the IQ-400E.

NOTE: Once you have powered up the IQ-400E and have successfully made a

connection to the Host, the panel R45 connectors Green LED will turn ON. You

will also see the Yellow LED strobe when it is trying to communicate to the

Host.

2. Open your Browser (e.g. Internet Explorer, Netscape, etc.)

3. Request the configuration form by entering the following in the “Address” field of the

Browser. http://192.168.168.32

4. An html form will appear (figure on next page).

Page cvii of 110 IQ-400 Installation Manual 33-10057-001-C

1 2 ... 115 116 117 118 119 120 121 122 123 124 125

Pas de commentaire

Sharp IQ-8000 Manuel d'installation Page 120