Sharp IQ-8000 Manuel de service télécharger pdf (Page 16)

Commissioning CarboVis 70x IQ TS

3 - 6

ba75950e02 11/2012

Connecting the sensor to

the sensor connection

cable

Fig. 3-5 Connecting the sensor

1. Take the protective caps off the plug connections of the sensor

and the SACIQ (SW) sensor connection cable and keep them

safe.

2. Plug the socket of the SACIQ (SW) sensor connection cable

onto the plug head connector of the sensor. At the same time,

rotate the socket so that the pin in the plug head connector (1)

clicks into one of the two holes in the socket.

3. Then screw the coupling ring (2) of the sensor connection

cable onto the sensor up to the stop.

SACIQ (SW)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 65 66

Pas de commentaire

Sharp IQ-8000 Manuel de service Page 16