Sharp DM-4500 Instructions d'exploitation télécharger pdf (Page 24)

6. Assembly

• Insert the new 12 V 100 W lamp (13.1) with the

dust cover straight into the socket until it

stops. Be sure that the lamp is inserted

straight.

• Remove the lamp’s dust cover.

Caution!

Do not remove the lamp’s dust cover until af-

ter you have installed the lamp. Avoid finger-

prints on the lamp.

• Replace the housing and fasten it in place us-

ing the fastening screw.

Fig. 12

Lamp housing 107/2

Releasing the

fastening screw

Fig. 13

Lamp housing 107/2

opened

1 Mount with

halogen bulb

2 Collector

Fig. 14 Rear view of the stand

1 Incident light lamp housing receptacle

2 Transmitted light lamp housing receptacle

3 12 V 100 W connection for transmitted light (symbol: )

4 12 V 100 W connection for incident light (symbol: )

• Place the lamp housing in the transmitted

light lamp housing receptacle (14.2) and fas-

ten it with the clamping screw on the side.

• Connect the lamp housing to the power supply

for transmitted light (symbol:

) (14.3).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 163 164

Pas de commentaire

Sharp DM-4500 Instructions d'exploitation Page 24