Sharp ER-A330 Manuel d'utilisateur télécharger pdf (Page 17)

CHAPTER 5 TEST FUNCTION

1. Start of test function

The following key operation is required in the SRV mode to start the

test.

Master reset is required when the system is to be started for the first

time.

2. List of test commands

No. Test contents Key operations

1 Mode switch test 1 → ST

2 Keyboard test XXXX02 → ST

3 Display and Buzzer test 3 → ST

4 Standard Drawer test 4 → ST

5 Option Drawer test 14 → ST

6 Printer test 5 → ST

7 RAM test 6 → ST

8 Battery voltage test 7 → ST

NOTE-1: Test message is printed on the journal

NOTE-2: The contents of the totalizer and the preset values are not

erased by the test.

3. Test function

1) Test No. 1: Mode switch test

1 Key operation

Then, turn the mode switches in the following order.

* In the mode switch test, turn the switch rhythmically.

2 Description

As the mode switch position number is displayed, check the num-

ber.

3 Termination

The test can be terminated when the mode switch is turned to the

SRV side from other position.

Termination print at normal end ****** 0 1

Termination print and error ******* 1

2) Test No. 2: Keyboard test

1 Key operation

(1) Enter the test command in succession to the sum check data

of the model.

Model name

Sum check data

(Standard keyboard data)

ER-A310 2428

ER-A330 2946

∗NOTE: Sum check data

The check sum is a decimal number obtained by

converting the hard code hexadecimal total of all

keys.

The CA/AT key are the exception.

(2) Next, push every key on the keyboard except for the receipt

and journal keys.

When the CA/AT key is pressed, the termination printout is

immediately produced assuming that all keys have been

pressed.

There is no order in which the keys have to be depressed.

Display: 02 XX ← XX = position code.

[Keyboard position code of model vs. key to be pressed]

[All key position code]

[ER-A310 standard keyboard layout]

[ER-A330 standard keyboard layout]

XXXX

Test command

MODE: SRV PGM VOID OFF OP X/Z REG MGR X1/Z1 X2/Z2 SRV

DISPLAYE: (0) (1) (2) OFF (3) (4) (5) (6) (7) (0)

Test command

Sum check data

65 68 67 58 77 78

0212

01 14 04 03

64 63

01 04

65 78

– 16 –

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 38 39

Commentaires sur ces manuels

Pas de commentaire

Sharp ER-A330 Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Caisses enregistreuses Sharp ER-A330