Sharp AF-A24CE Spécifications télécharger pdf (Page 19)

USING SCREW-MOUNT TAKUMAR LENSES

Conventional screw-mount Takumar lenses (both Super-

Takumar and SMC Takumar) can be easily mounted onto

your camera by attaching them first to a Mount Adaptor

K. However, when Adaptor K is used, the following is

true:

1. Due to the difference in coupling systems, the

automatic diaphragm will not function.

2. Full-aperture metering lenses will function as stop-

down metering lenses.

How to Use Mount Adaptor K

1. Screw the conventional Takumar lens into the Mount

Adaptor K.

2. Attach the Adaptor/lens unit to the camera body by

aligning the red dots and , and turning the lens clockwise

until it locks with a click. (This takes slightly less than a

quarter of a revolution.)

3. To remove the lens, leaving the Mount Adaptor K

attached to the camera body, simply unscrew the lens

counterclockwise. Other screw-mount

Takumar lenses can then be attached in the normal way.

To remove the Mount Adaptor K from the camera body,

first remove the screw-mount lens. Then press, with your

thumbnail or a pointed object such as a ballpoint pen,

against the spring pin

Turn the Mount Adaptor K counterclockwise until you

feel it release, and take it out.

Since the mechanism for locking in the Mount Adaptor K

is totally different from that which locks in an SMC

Pentax bayonet-mount lens, the lens release lever on the

camera body plays no part at all. www.4butkus.org

1 2 ... 14 15 16 17 18 19 20 21 22

Pas de commentaire

Sharp AF-A24CE Spécifications Page 19