Sharp ER-A330 Manuel d'utilisateur télécharger pdf (Page 2)

CHAPTER 1. SERVICE (SRV) MODE

The SRV key is used for operating in the SRV mode.

1. SRV. reset (Program Loop Reset)

Used to return the machine back to its operational state after a lock-

up has occurred.

Procedure

• Method 1

1) Turn off the AC switch.

2) Set the mode switch to (SRV′) position.

3) Turn on the AC switch.

4) Turn to (SRV) position from (SRV′) position.

• Method 2

1) Set the mode switch to PGM2 position.

2) Turn off the AC switch.

3) While holding down JOURNAL FEED key and RECEIPT FEED

key, turn on the AC switch.

2. Master reset (All memory clear)

There are two possible methods to perform a master reset.

Used to clear all memory contents and return machine back to its

initial settings. return keyboard back to default. for default keyboard

layout.

Procedure-1 (with SRV key)

1) Unplug the AC cord from the wall outlet.

2) Set the MODE switch to the (SRV′) position.

3) Plug in the AC cord to the wall outlet.

4) While holding down JOURNAL FEED key, turn to (SRV) position

from (SRV′) position.

Procedure-2 (without SRV key)

1) Turn the mode switch to the (REG) position.

2) Ensure the batteries are not installed in the battery compartment

and insert the plug into the outlet.

3) The right most decimal point will blink for a few seconds.

4) The register will sound three beeps.

5) The register will display " ."

3. Reading of the SRV mode program

List of program report

JOB# REPORT NAME

900

SRV mode program full item report

(Not included the keyboard layout)

950 Keyboard layout report

[JOB# 900]

All parameters contained for the SRV mode as listed

Key operation

• SRV mode

• PGM mode

ER-A310

900

TL/NSX

9900

X TL/NS

– 1 –

1 2 3 4 5 6 7 ... 28 29

Commentaires sur ces manuels

Pas de commentaire

Sharp ER-A330 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Caisses enregistreuses Sharp ER-A330