Sharp AL-1000 Series Spécifications télécharger pdf (Page 30)

Supplies and user maintenance

USER MAINTENANCE

Transfer charger

If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the

charger using the following procedure.

Turn the power switch off.

Open the side cover while pressing the side cover open button.

Take the charger cleaner out by holding the tab.

Set the charger cleaner onto the transfer charger and gently slide the cleaner back

and forth two or three times.

Slide the charger cleaner from one end to the other end along the groove of

the transfer charger. If the cleaner is stopped on the way, smudges on copies

may occur.

Return the charger cleaner to its original position. Close the side cover by pressing

the round projections near the side cover open button.

Turn the power switch on.

When copier is not in use

To prevent entry of dust and foreign matter, store the copier as follows.

Remove the power cord and secure the copier using tape (two locations).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 46 47

Pas de commentaire

Sharp AL-1000 Series Spécifications Page 30