Sharp AL-1000 Series Spécifications télécharger pdf (Page 25)

Special functions

TONER SAVE MODE

Press and hold down the exposure mode selector key for approximately 5 seconds.

The manual ( ) indicator will go out and the photo ( ) indicator will begin to

blink. The exposure indicator marked “5” will light up, indicating the standard toner

mode is active.

To enter the toner save mode, press the light ( ) key.

The exposure indicator marked “1” will light up, indicating the toner save mode is

selected.

Press the exposure mode selector key twice. The photo ( ) indicator will stop

blinking and the AUTO indicator will light up steadily. The toner save mode is now

active.

To return to the standard mode, repeat the procedure but use the dark ( )

key to select exposure level “5” in step 3.

USER PROGRAMS

(power save modes, auto clear time)

The user programs allow the parameters of certain functions to be set, changed, or canceled

as desired.

Setting the power save modes and auto clear time

Press and hold down the light ( ) and dark ( ) keys simultaneously for more

than 5 seconds until all the alarm indicators ( , , ) blink and “– –” appears in

the display.

Use the left copy quantity ( ) key to select a user program number (1: auto clear

time, 2: preheat mode, 3: auto power shut-off timer, 5: auto power shut-off mode).

The selected number will blink in the left side of the display.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 46 47

Pas de commentaire

Sharp AL-1000 Series Spécifications Page 25