Sharp AL-1451 Spécifications télécharger pdf (Page 56)

AL-1551 DISASSEMBLY AND ASSEMBLY 8-19

H. PS roller

1) Remove the parts.

2) Remove the paper supply roller.

I. Paper exit roller

1) Remove the parts.

2) Remove the paper exit roller.

10.2nd cassette section

Paper feed unit removal

1) Remove the screw.

2) Remove the rear cover.

* When installing, engage the pawl and install the unit.

1) Open the right cabinet.

2) Remove three screws.

3) Remove one connector.

4) While tilting down the 2nd connection arm A, pull and remove the

paper feed unit toward you.

* When installing, securely insert two bosses C on the machine side

and two bosses D on the paper feed unit side. Be sure to secure the

ground wire B.

* Insert the 2nd page feed.

A. Paper sensor

1) Remove the pawl.

2) Remove the paper sensor.

3) Remove the harness.

No. Part name Ref.

A Paper sensor

B Cassette detection SW

C Paper feed solenoid

D Transport roller

E Paper feed clutch

F 2nd paper feed roller

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 125 126

Pas de commentaire

Sharp AL-1451 Spécifications Page 56