Sharp TL-M5200 Spécifications télécharger pdf (Page 13)

-13

Setting up the Monitor Network Environment

5 Click “Internet Protocol Version

4 (TCP/IPv4)”, and click the

“Properties” button.

6 Confirm or change an IP address

for the setup computer.

1 Confirm and note the current IP ad-

dress, Subnet mask and Default

gateway.

Make sure to note the current IP ad-

dress, Subnet mask and Default gate-

way as you will be required to reset

them later.

2 Set temporarily as follows :

IP address : 192.168.150.3

Subnet mask : 255.255.255.0

Default gateway : (Do not input any

values.)

Note

• The factory default settings for the monitor are

as follows:

DHCP Client : OFF

IP address : 192.168.150.2

Subnet mask : 255.255.255.0

Default gateway : 0.0.0.0

After setting, click the “OK” but-

ton, and then restart the computer.

After confirming or setting, proceed to “3. Setting up Network Connection for the Moni-

tor”.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 40 41

Pas de commentaire

Sharp TL-M5200 Spécifications Page 13