Sharp TINSE1166MPZZ Manuel d'utilisateur télécharger pdf (Page 11)

ENGLISH

■ Connection with RS-232 cable

IfyouconnectthemonitorinadaisychainusingRS-232

cable, using the monitor buttons on the master (main unit),

settings are copied to the slave (expansion unit) and operation

from the master can perform operation for all monitors. Setting

eachIDNo.inthemonitorisrequired.

1. Connect the monitors in order.

Therstmonitorwillbesetasmaster(mainunit)andthe

second monitor and beyond will be slaves (expansion

units).

ConnecttheRS-232Coutputterminaloftherstmonitor

(master)andtheRS-232Cinputterminalofthesecond

monitor(slave)togetherusingRS-232cable(straight).

Connectinthesamewaytothethirdandsubsequent

monitors.

Upto25monitorscanbeconnected.(Dependingonthe

length of the cable used and the surrounding environment.)

RS-232 straight cable

(commercially available)

First monitor: master Second monitor: slave

Third monitor: connects to slave

RS-232C input terminal

RS-232C

input terminal

RS-232C

output terminal

RS-232C

output terminal

2. Set the ID No.

Perform operation with the monitor buttons on the master.

IfyousetAUTOASSIGNIDNo.,locatedinthemainmenu

ofthemonitortoON,theIDNo.willbeautomatically

assigned in order from the master. (See Operation Guide.)

(If you attach the control kit (optional), you can perform

operation of the monitors with the remote control unit.)

■ Connection with the control kit (optional)

If performing operation of the monitor with the remote control

unit,thePN-ZR01controlkit(optional)isrequired.

• Canperformoperationofanarbitrarymonitororall

monitorswiththeremotecontrolunitoftherstmonitor.

• Canperformoperationofupto25monitors.

• ConnectthemonitorstogetherinadaisychainwithRS-232

cable.

Attach the remote control sensor box to one of the areas listed below.

* Whenattachedtotheleftside,becausethetopand

bottom for the remote control sensor box will be reversed

(the connection cable will be on top), the right side is

recommended.

For the monitor in

horizontal orientation

For the monitor in

vertical orientation

1. Insert the anti-rotation protrusion of the xing arm into

the anti-rotation hole of the monitor.

2. Secure the stand angling hole of the monitor with the

mounting screw.

3. Adjust the angle of the remote control sensor box, and

secure it with the xing screw, so that it may accurately

receive signals from the remote control unit.

Anti-rotation protrusion

Angle

adjustment

Anti-rotation hole

Fixing arm

Mounting screw

Fixing screw

Remote control

sensor box

Stand angling hole

4. Insert the remote control sensor box connection cable

into the control kit terminal.

Connection cableControl kit terminal

Remote control

sensor box

* Donotconnectthecableafterextendingitwitha

commercially available cable.

TIPS

• Whenyouconnecttheremotecontrolsensorbox,the

brightness sensor can be used.

The screen brightness will automatically change according

to lighting conditions and the surrounding brightness. (See

Operation Guide.)

Brightness

sensor

Connecting Peripheral Equipment

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Sharp TINSE1166MPZZ Manuel d'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Moniteurs Sharp TINSE1166MPZZ