Sharp PN-655U Manuel d'utilisateur télécharger pdf (Page 43)

ENGLISH

The command examples shown on this page assume the following connection and ID number set up.

IDST......A monitor receiving this command sets its own ID number in the parameter field.

Example: IDST0001

001 ← The ID number of this monitor is set to 1.

After linking monitors, you can automatically assign ID numbers by using the IDST command with

the Repeater control (see “Repeater control” on page 43).

[Example]

If you connect monitors as shown above, and use the command “IDST001+”, ID numbers will be set

automatically, as shown below.

[Example]

IDST001+ ← ID setting command with repeater control

WAIT

001 ← “OK” response from ID number: 1

OK 002 ← “OK” response from ID number: 2

OK 003 ← “OK” response from ID number: 3

OK 004 ← “OK” response from ID number: 4 (End)

Note

PC ID number: 1 ID number: 2 ID number: 3 ID number: 4

PC Set 1 Set 2 Set 3 Set 4

PC ID number: 1 ID number: 2 ID number: 3 ID number: 4

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 127 128

Pas de commentaire

Sharp PN-655U Manuel d'utilisateur Page 43