Sharp PN-655U Manuel d'utilisateur télécharger pdf (Page 22)

Removing the Temporary Stand

Follow the procedure below to remove the temporary stand.

• Before removing the temporary stand, prepare wall-hanging brackets to mount the monitor unit.

Read the manual of the brackets or stand for their mounting procedure. (The screw holes for

mounting brackets (M10 x 4 holes) are provided on the rear of the monitor. (See page 9.))

• The monitor must be installed or moved by two or more people.

1. Hold the monitor with the handles on the rear to

prevent it from falling down, and remove the upper

and lower stand fixing screws (4).

2. Lift the monitor by holding it with the handles

and the underside of the unit.

3. When the installation is complete, attach the

supplied stand hole protection covers as

necessary.

• The temporary stand is specifically designed for this monitor. Do not use the removed stand for other

devices.

• Store the removed screws together with the stand. You must use the original screws when you mount the

monitor onto the stand again. Using other screws could lead to a malfunction.

(Rear view)

1. Fold the sheet

perpendicularly with

the adhesive side inward.

2. Remove the adhesive cover

and attach the sheet to the monitor.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 127 128

Pas de commentaire

Sharp PN-655U Manuel d'utilisateur Page 22