Sharp FO-A760 Spécifications télécharger pdf (Page 38)

Override Ringing

34

Override Ringing

This function allows selected callers

using a touch-tone telephone to

override the answering system's

outgoing message and cause the

machine to make a special ringing

sound, alerting you that they are calling.

This is useful when you are near the

machine but only want to talk with

certain callers, taking all other calls on

the answering machine.

Programming the override code

To override the answering system, your

callers must enter a 3-digit override

code from their telephone. This code

has been set to "009" at the factory. If

you wish to change the code, follow the

steps below.

Important! Make sure the override

code is different from the remote code

(page 35).

1 Press , , , and .

2 Enter the desired 3-digit code.

3 Press .

4 Press to exit.

F

Overriding the answering system

Your callers should follow the steps

below to override the answering

machine.

1 The caller calls your machine from a

tone dial telephone. When the

outgoing message begins, the caller

presses on their telephone.

• The caller will hear a short beep, and

the outgoing message will stop.

2 The caller enters the override code

and then .

• If an incorrect code is entered, the

caller will hear four beeps. He or she

must re-enter the correct code within

10 seconds or the line will be

disconnected.

3 Your machine will make a special

ringing sound. Pick up the handset

to answer the call.

• If you do not answer within 30

seconds, the outgoing message will

play again and the caller can leave a

message.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 68 69

Commentaires sur ces manuels

Pas de commentaire