Sharp FO-A760 Spécifications télécharger pdf (Page 14)

Imaging Film

10

Connecting the phone line

Connect the phone line cord to the TEL.

LINE socket and a wall telephone

socket (use the provided adapter if

needed).

TEL.LINE

Imaging Film

Checking the pre-loaded sample

roll

A sample roll of imaging film has been

pre-loaded in the machine. Perform

steps 1 to 2 and 5 to 7 of Replacing the

imaging film below to check the film and

make sure it is taut.

♦ The sample roll of imaging film can

print about 20 pages.

If [FILM END] appears

If [FILM END] appears in the display for

longer than 10 seconds, open the

machine (see Steps 1 and 2 of

Replacing the imaging film below) and

check the film. If the film has

completely wound onto the front spool,

replace the film. Otherwise, perform

Steps 5 to 7 of Replacing the imaging

film to remove slack.

Replacing the imaging film

Replacement film

Please purchase the following imaging

film:

SHARP FO-31CR (33 m x one roll)

Follow the steps below to replace the

imaging film.

Note: Before replacing the imaging

film, remove any paper from the paper

tray and push in the tray extension.

Setting the Dial Mode

The machine is initially set for tone

dialling. If you are on a pulse dial line,

you must change the DIAL MODE

setting to pulse.

1 Press , , .

2 Press to select TONE, or

to select PULSE.

3 Press to exit.

F

Wall socket

TEL. LINE

socket

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 68 69

Commentaires sur ces manuels

Pas de commentaire