Sharp SD-AT50 Instructions d'exploitation télécharger pdf (Page 55)

E-50

SD-AT50(U)E5.fm02/7/19

SD-AT50

ENGLISH

DX-AT50

References

- Troubleshooting chart -

DVD Player

If trouble occurs

When this product is subjected to strong external interference (mechanical shock,

excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is

operated incorrectly, it may malfunction.

If such a problem occurs, do the following:

Resetting the AV control unit:

Caution:

This operation will erase all data stored in memory and restore various settings to the

initial status (default).

Resetting the DVD player:

Unplug the unit and, after waiting 5 minutes or longer, plug it in again.

When the protection circuit is activated:

When short-circuiting the speaker cords or turning the volume too high, the protec-

tion circuit may be activated and the power may turn off.

Unplug the subwoofer/amplifier unit and plug it in again after 5 minutes or more.

Turn down the volume if set too high.

Before transporting the system

1 Press the ON/STAND-BY button of the DVD player to turn the power on.

2 Open the disc tray and remove the disc.

3 Close the disc tray and enter the system to stand-by mode.

4 After the power indicator goes off, unplug the system.

Symptom Possible cause Reference

page

Even though a disc has been

loaded, "- - - - - " is displayed.

! Is the disc loaded upside down?

! Is the disc very dirty?

Playback sounds are

skipped.

! Does the disc satisfy the standards?

! Is the system located near exces-

sive vibrations?

! Has condensation formed inside the

system?

P. 48

The control buttons do not

function. Music or video play-

back is interrupted.

! Is the disc very dirty?

! Does the disc satisfy the standards?

! Is the system located near exces-

sive vibrations?

! Has condensation formed inside the

system?

P. 48

Pictures and sound are

skipped.

! Is the disc very dirty?

! Is the system located near exces-

sive vibrations?

! Has condensation formed inside the

system?

P. 48

The system does not operate

even if the power is on.

! Is a disc other than DVD (region

number 1 or ALL), audio CD loaded?

P. 5

Image cannot be played

back. (Sound is not heard.)

! Are the video and audio cables con-

nected improperly?

P. 11 - 15

! Is a disc other than DVD (region

number 1 or ALL), audio CD loaded?

P. 5

! Is the disc very dirty?

! Is the disc loaded upside down?

! Clean the optical pickup if it is dirty. P. 51

! Is the TV input set to "VIDEO 1/VID-

EO 2" etc.?

P. 47

! Is the system turned on? P. 18

1 Unplug the subwoofer/amplifier unit.

2 While holding down the ON/STAND-BY button, plug in the AC power cord.

At this time, the component will not be turned on.

3 Press the ON/STAND-BY button again to turn the power on.

Downloaded From Disc-Player.com Sharp Manuals

1 2 ... 50 51 52 53 54 55 56 57 58

Commentaires sur ces manuels

Pas de commentaire

Sharp SD-AT50 Instructions d'exploitation Page 55

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de DVD Sharp SD-AT50