Sharp MX-M264N Manuel d'utilisateur télécharger pdf (Page 71)

100

101

1-30

BEFORE USING THE MACHINE

Contents

Print side face up or face down

Paper is loaded with the print side face up or face down depending on the paper type and tray.

Trays 1 to 4

Load the paper with the print side face up.

However, if the paper type is "Letter Head" or "Pre-Printed", load the paper with the print side face down*.

Bypass tray

Load the paper with the print side face down.

However, if the paper type is "Letter Head" or "Pre-Printed", load the paper with the print side face up*.

* If "Disabling of Duplex" is enabled in the system settings (administrator), load the paper in the normal way (face up in

trays 1 to 4; face down in the bypass tray).

Paper that cannot be used

• Special media for inkjet printers

(fine paper, glossy paper, glossy film, etc.)

• Carbon paper or thermal paper

• Pasted paper

• Paper with clips

• Paper with fold marks

• Torn paper

• Oil-feed transparency film

• Thin paper less than 55 g/m

(15 lbs.)

• Paper that is 257 g/m

(69 lbs.) or heavier

• Irregularly shaped paper

• Stapled paper

• Damp paper

• Curled paper

• Paper on which either the print side or the reverse side

has been printed on by another printer or multifunction

device.

• Paper with a wave-like pattern due to moisture

absorption

Non-recommended paper

• Iron-on transfer paper

• Japanese paper

• Perforated paper

• Various types of plain paper and special media are sold. Some types cannot be used with the machine. Contact your

dealer or nearest authorised service representative for advice on using these types of paper.

• The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper

characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest

authorised service representative for advice on using these types of paper.

• The use of non-recommended or prohibited paper may result in skewed feeding, misfeeds, poor toner fusing (the toner

does not adhere to the paper well and can be rubbed off), or machine failure.

• The use of non-recommended paper may result in misfeeds or poor image quality. Before using non-recommended paper,

check if printing can be performed properly.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 793 794

Commentaires sur ces manuels

Pas de commentaire

Sharp MX-M264N Manuel d'utilisateur Page 71

Commentaires sur ces manuels

Produits connexes et manuels pour Lecteurs de Blu-Ray Sharp MX-M264N