Sharp CD-E250E Guide d'installation télécharger pdf (Page 7)

MN-748

Finger tight only. Do not over tighten.

4. LOOSELY install the

/8” lock washer (N) and

/8 x

/8” hex head cap screws (M). Leave

loose to allow installation of the upper bracket.

5. Attach the lower bracket (C) to the bottom of the air spring. Use the forward, inboard

hole as shown in g. 4.

6. Secure lower bracket to the air spring using the

/8” lock washers (N) and

/8” x

/8” hex

head cap screws (M). Torque to 20 ft./lbs.

7. This completes the assembly of the Passenger side (g. 5). Now assemble the Driver

side (left hand) in the same manner.

NOTE

Driver Side

Passenger Side

Forward

g. 2

Short Threads into

the Air Spring

g. 5

g. 3

g. 4

Driver

Forward

Passenger

Use this hole

LoadLifter 5000

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Pas de commentaire

Sharp CD-E250E Guide d'installation Page 7