Sharp CD-E250E Guide d'installation Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
MN-748
9
Some late models are equipped with the RSC (roll stability control) system (g. 16). On
these models it will be necessary to loosen the axle vent tube bolt and rotate the brake
line junction box counter clockwise as far as it will let you. Tighten the axle vent tube bolt
securely (g. 17).
3. Secure the lower bracket to the axle using the saddle clamps (G), at washers (K) and
3/8” nuts (J). See g. 18.
4. Torque the nuts to 16 ft-lbs (g. 18). Trim excess bolt off if desired.
g. 15
NOTE
g. 17
g. 18
g. 16
Rotate Counter
Clockwise
Axle Vent
Tube Bolt
LoadLifter 5000
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Commentaires sur ces manuels

Pas de commentaire