Sharp 21F-A30 Manuel de l'opérateur télécharger pdf (Page 42)

OPERATION

Form 169000 / 169040 40 Revision C

o. Open header LH driveshield.

p. Check hose routing at the reel motor. The hose

routing depends on which windrower model the

header is being attached to. The header is

factory assembled for M150 and M200

windrowers.

q. Change hoses as follows if header is being

mounted on a M100 windrower:

1. Disconnect hose (C) at tee (E).

2. Disconnect hose (D) at reel motor.

3. Disconnect tee (E) at motor lower port and

relocate to upper port.

4. Connect hose (D) to tee (E).

5. Connect hose (C) to motor lower port.

FACTORY CONFIGURATION

M100/M205 CONFIGURATION

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 191 192

Pas de commentaire

Sharp 21F-A30 Manuel de l'opérateur Page 42