Sharp CD-M4000 Guide de l'utilisateur Page 195
- Page / 420
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
setnetwork(8)
System Administration 173
■ To reflect information on the specified network interface, execute the
applynetwork(8) command and reset XSCF.
EXAMPLES
EXAMPLE 1 Sets the IP address 192.168.10.10 and net mask 255.255.255.0 for XSCF-
LAN#0 on XSCF unit 0.
EXAMPLE 2 Sets the IP address 192.168.10.10 and net mask 255.255.255.0 for XSCF-
LAN#0 on XSCF unit 0 in the midrange system.
EXAMPLE 3 Disables XSCF-LAN#1 on XSCF unit 0.
EXAMPLE 4 Sets the IP address 192.168.10.128 on ISN on the XSCF unit 0. By default,
255.255.255.0 is set for the net mask.
EXAMPLE 5 Sets the IP address 192.168.11.10 and net mask 255.255.255.0 for XSCF-
LAN#0 on XSCF unit 1.
EXAMPLE 6 Sets the IP address 192.168.1.10 and net mask 255.255.255.0 for the takeover
IP address of XSCF-LAN#0.
EXIT STATUS The following exit values are returned:
SEE ALSO applynetwork(8), shownetwork(8)
XSCF> setnetwork xscf#0-lan#0 -m 255.255.255.0 192.168.10.10
XSCF> setnetwork lan#0 -m 255.255.255.0 192.168.10.10
XSCF> setnetwork xscf#0-lan#1 -c down
XSCF> setnetwork xscf#0-if 192.168.10.128
XSCF> setnetwork xscf#1-lan#0 -m 255.255.255.0 192.168.11.10
XSCF> setnetwork lan#0 -m 255.255.255.0 192.168.1.10
0 Successful completion.
>0 An error occurred.
- Enterprise 3
- M4000/M5000/M8000/M9000 3
- Servers XSCF Reference Manual 3
- Contents 7
- Contents vii 9
- Preface ix 11
- Audience 12
- Notation of This Manual 12
- Preface xi 13
- Documentation 14
- Preface xiii 15
- Book Title Manual Code 16
- Documents 17
- Prompt Notations 18
- Software License 19
- Reader's Comment Form 21
- BUSINESS REPLY MAIL 22
- XSCF> addcodlicense \ 33
- ■ Fan unit (FANU) 35
- adduser -u 359 jsmith 37
- System Administration 19 41
- On a high-end server: 41
- System Administration 25 47
- XSCF> clockboard 49
- XSCF> clockboard -s 1 49
- deletecodlicense\ 57
- deleteuser jsmith 61
- disableuser jsmith 63
- enableuser jsmith 65
- ■ The time of its diagnosis 75
- System Administration 57 79
- Display in Verbose Mode 79
- Required Privileges Commands 87
- EXAMPLE 2 89
- EXAMPLE 1. Units are given in 89
- LED off on fast slow 90
- ioxadm env -te iox@A3B5 94
- ioxadm list 94
- ioxadm list iox@12B4 95
- ioxadm -v list IOU#1-PCI#1 95
- XSCF> man addboard 97
- XSCF> man intro 97
- XSCF> moveboard -d 1 00-0 101
- Server: server.example.com 103
- Address: xx.xx.xx.xx 103
- ■ To use the -h option 105
- password -e 2008-02-02 107
- password -i 10 107
- XSCF>poweroff -q -n -d 3 112
- prtfru -c system-board 118
- prtfru -l system-board 118
- prtfru -l 118
- prtfru -l power-supply 119
- prtfru -l mem-module 119
- EXAMPLE 1 Resets the XSCF 121
- ■ CPU memory unit (CMU) 123
- ■ I/O unit (IOU) 123
- ■ FAN unit (FANU) 123
- ■ Power supply unit (PSU) 123
- ■ XSCF unit (XSCFU) 123
- reset -d 0 panic 127
- XSCF> resetdateoffset 129
- EXAMPLE 4 Enabling Archiving 138
- ■ System startup and shutdown 139
- ■ Login and logout 139
- ■ Authentication actions 139
- ■ Administrative actions 139
- EXAMPLE 1 140
- EXAMPLE 3 141
- EXAMPLE 5 Enabling Auditing 143
- EXAMPLE 6 Enabling Warnings 143
- XSCF> setautologout -s 30 145
- ■ Rebooting the domain 150
- XSCF> setdcl -d 0 -r 00 01 157
- ■ Diagnostic level: 159
- ■ Secure Mode, Autoboot: 159
- ■ Secure Mode, Autoboot: off 160
- EXAMPLE 5 Sending Test Email 173
- ■ The CSR is overwritten 179
- showldap 183
- setldap -t jsmith 183
- XSCF> setlocale -s C 185
- XSCF> 185
- XSCF> setled blink 187
- XSCF> setled reset 187
- setlookup -p ldap 189
- ■ IP address 193
- ■ Net mask 193
- setpasswordpolicy -m 12 -r 5 203
- EXAMPLE 1 for details 207
- Setting Privileges for JSmith 209
- setprivileges jsmith none 209
- -e yyyyyyyy fiche 225
- SEE ALSO showsnmp(8) 226
- setsnmpusm create -a SHA bob 230
- setsnmpusm clone -u sue joe 230
- setsnmpusm delete joe 230
- EXAMPLE 1 Create a Group 232
- EXAMPLE 4 Create Access 233
- [Ctrl+D] 239
- XSCF> settelnet -c enable 241
- XSCF> settelnet -c disable 241
- in the following format 245
- is a positive value.) 245
- time. hh is 00–24, mm is 245
- the following format 246
- Asia/Tokyo 247
- XSCF> setupfru -x 4 sb 0 250
- XSCF> showaltitude 251
- Displaying Auditing Status 258
- showaudit 258
- showaudit -c LOGIN 258
- XSCF> showautologout 261
- XSCF> showcod 267
- CMU00 Quad-XSB, CMU02 Uni-XSB 274
- XSCF> showdate 279
- Mon Jan 23 14:53:00 JST 2006 279
- XSCF> showdate -u 280
- Mon Jan 23 05:56:15 UTC 2006 280
- System Administration 263 285
- XSCF> showdomainmode -d 0 294
- Host-ID :0f010f10 294
- Diagnostic Level :min 294
- Secure Mode :on 294
- Autoboot :on 294
- System Administration 277 299
- XSCF> showemailreport 303
- EMail Reporting: enabled 303
- System Administration 285 307
- 0 Successful completion 308
- >0 An error occurred 308
- ■ Number of installed FRUs 311
- ■ Domain information 311
- System Administration 291 313
- System Administration 293 315
- XSCF> showhostname -a 317
- XSCF> showhostname xscf#0 318
- XSCF> showlocale 323
- XSCF> showlocator 325
- Locator LED status:Blinking 325
- ■ Error log 331
- ■ Power log 333
- ■ Event log 334
- ■ Monitoring message log 336
- ■ Console message log 336
- ■ Panic message log 337
- ■ IPL message log 337
- showlookup 341
- XSCF> showmonitorlog 343
- System Administration 329 351
- [Copyright text displays.] 353
- showpasswordpolicy 357
- XSCF> showpowerupdelay 359
- XSCF> setupfru -x 1 sb 0 361
- XSCF> showresult 361
- XSCF> showshutdowndelay 367
- XSCF> showsnmpusm 373
- Username Auth Protocol 373
- -------- 373
- -c hostkey][-M] 377
- -c pubkey [-u user_name][-M] 377
- XSCF> showstatus 381
- XSCF> showtelnet 383
- Telnet status:enabled 383
- is plus, and displayed 385
- is minus 385
- snapshot -d usb0 -r 397
- XSCF> switchscf -t Standby 399
- date-time:+nd 412
- -B option and must be 412
- System Administration 393 415
- XSCF> who 417
Produits connexes et manuels pour Logiciel Sharp CD-M4000
Logiciel Sharp FO-NS2 Manuel de service
(43 pages)
(43 pages)
Logiciel Sharp MXUSX5 - Desk - PC Spécifications
(152 pages)
(152 pages)
(1 pages)
Logiciel Sharp Intellisync Manuel de service
(23 pages)
(23 pages)
Logiciel Sharp AR-PG1 Spécifications
(47 pages)
(47 pages)
Logiciel Sharp PixLab Manuel d'utilisateur
(48 pages)
(48 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.047 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels