Sharp MX-7001 Manuel d'utilisateur télécharger pdf (Page 131)

100

101

Press the [COLOR START] key ( )

or the [BLACK & WHITE START] key

().

Copying will begin.

If you are using the document glass to copy multiple original

pages, copying will take place as you scan each original. If you

have selected sort mode, change originals and press the

[START] key. Repeat until all pages have been scanned and

then touch the [Read-End] key. (For the second original and

following originals, use the same [START] key as you did for

the first original.)

To cancel scanning of the original and copying...

Press the [STOP] key ( ).

If a ratio setting is used in combination with an erase setting, the erase width will change according to the selected ratio.

For example, if the erase width setting is 1" (20 mm) and the image is reduced to 50%, the erase width will be 1/2" (10 mm).

To cancel the erase setting...

Touch the [Cancel] key in the screen of step 3.

System Settings (Administrator): Erase Width Adjustment

The default erase width can be set from 0" to 1" (0 mm to 20 mm). The factory default setting is 1/2" (10 mm).

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 709 710

Commentaires sur ces manuels

Pas de commentaire

Sharp MX-7001 Manuel d'utilisateur Page 131

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Sharp MX-7001