Sharp MX-B201D Spécifications télécharger pdf (Page 104)

TROUBLESHOOTING AND MAINTENANCE

103

Gently remove the misfed paper

from under the fusing unit as shown

in the illustration. If the paper cannot

be removed, proceed to "C: Misfeed

in the transport area".

Raise the fusing unit release lever and then close the side

cover by pressing the round projections near the side cover

open button. The error indicator will go out and the ready

indicator will light up.

C: Misfeed in the transport area

Lower the fusing unit release lever.

See "B: Misfeed in the fusing area" (p.102).

Open the front cover.

To open the front cover, see "TONER CARTRIDGE REPLACEMENT"

(p.105).

Rotate the roller rotating

knob in the direction of the

arrow and gently remove the

misfed paper from the exit

area.

The fusing unit is hot. Do not touch the fusing unit when

removing misfed paper. Doing so may cause a burn or other

injury.

• Do not touch the surface of the drum (green portion) of the drum

cartridge when removing the misfed paper. Doing so may cause

smudges on copies.

• Do not remove the misfed paper from above the fusing unit. Unfixed

toner on the paper may stain the paper transport area, resulting in

smudges on copies.

Roller rotating

knob

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 114 115

Pas de commentaire

Sharp MX-B201D Spécifications Page 104