Sharp MX-B201D Spécifications télécharger pdf (Page 102)

101

MISFEED REMOVAL

When a misfeed occurs, the error indicator blinks, "CLEAR PAPER JAM" appears in

the display, and the machine stops operating. If a misfeed occurs when using the

RSPF, "RETURN X ORIGINAL(S) START TO RESUME" will appear in the display.

("X" indicates the number of pages to be returned.). This indicates the number of the

originals that must be returned to the document feeder tray after a misfeed. Return

the required number of originals. This number will be cleared when copying is

resumed or the [CLEAR] key ( ) is pressed. If an original misfeed occurs in the

RSPF, the machine will stop and the error indicator will blink. To remove a misfeed

from the RSPF, see "D: Misfeed in the RSPF" (p.104).

Open the bypass tray, and

then open the side cover.

Check the misfeed location. Remove the misfed paper

following the instructions for each location in the illustration

below. If the error indicator blinks, proceed to "A: Misfeed in

the paper feed area" (p.102).

If paper is misfed here, proceed to "A:

Misfeed in the paper feed area".

If paper is misfed here, proceed to "B:

Misfeed in the fusing area".

If the misfed paper is seen from

this side, proceed to "C: Misfeed

in the transport area".

(p.103)

(p.102

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 114 115

Pas de commentaire

Sharp MX-B201D Spécifications Page 102