Sharp DX-C200 Guide de l'utilisateur télécharger pdf (Page 39)

When removing print cartridges, be careful not to touch •

the Laser Scanning Unit on the underside of the upper

cover (the position shown by the arrow in the illustra-

tion).

If cyan, magenta, or yellow toner runs out, you can print in black and white using just the black •

toner. Change the color mode setting to Black and White using the machine’s driver.

If black toner runs out, you cannot print in black and white or color until the black print car- •

tridge is replaced.

Pull up the lever on the top cover,

and then carefully raise the top

cover.

Make sure that the ADF is closed.

CES138

Carefully lift out the print cartridge

vertically, holding its center.

• Do not shake the removed print cartridge.

Doing so can cause remaining toner to

leak.

• Place the old print cartridge on paper

or similar material to avoid dirtying your

workspace.

• The toner color is indicated by the label

on each print cartridge.

CES408

CES137

1 2 ... 34 35 36 37 38 39 40 41 42 43 44

Pas de commentaire

Sharp DX-C200 Guide de l'utilisateur Page 39