Sharp DX-C200 Guide de l'utilisateur télécharger pdf (Page 12)

Using the Scanner Function

Initial Screen and Basic Operation

The following is the initial screen in scanner mode.

1. Current status or messages

2. Current scanning mode and settings

3. Selection key items

• When “Specify Dest.” is displayed:

Scan to E-mail, Scan to FTP, or Scan to Folder functions can be used.

• When “Save Scn Data to USB” is displayed:

A USB ﬂ ash disk is inserted in the machine, and the Scan to USB function can

be used.

If a USB ﬂ ash disk is inserted in the machine, scanning operations other than Scan to USB •

are disabled on the control panel.

Scan to E-mail, Scan to FTP, and Scan to Folder destinations must be registered using •

Web Image Monitor in advance (the Scan to USB function does not require destinations

registered). For details, see “Using the Scanner Function”, User Guide.

To send ﬁ les via e-mail, SMTP and DNS settings must be conﬁ gured properly in advance. •

For details, see “Conﬁ guring the Machine Using Web Image Monitor”, User Guide.

It is recommended that you call the receiver and conﬁ rm with them when sending important •

documents.

Certain types of USB ﬂ ash disks cannot be used for the Scan to USB function. •

The original in the ADF takes precedence over the original on the exposure glass if you •

place originals both in the ADF and on the exposure glass.

❖ Basic Operation for Scan to E-mail/FTP/Folder

Press the [Scanner] key.

Conﬁ rm that “Specify Dest.” is shown on

the screen.

CES175

CES251

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Pas de commentaire

Sharp DX-C200 Guide de l'utilisateur Page 12