Sharp R-201T Manuel d'instructions télécharger pdf (Page 29)

MS 201 T

English

Removing the starter

N Remove screws (1)

N Lift the fan housing off of the

crankcase and pull it away to the

side

Removing the rope rotor

N Remove the spring clip (1)

N Carefully remove the rope rotor with

washer (2) and pawl (3)

The rewind spring can jump out – risk of

injury!

Replacing a torn starter rope

N Pry the cap out of the starter grip

N Remove remaining rope from the

rotor and starter grip

N Thread the new starter rope through

the starter handle and secure it by

making a simple overhand knot

N Pull the knot into the starter grip

N Refit the cap in the grip

Installing the rope rotor

N Thread the rope from above through

the rope guide bush (1) and rope

rotor (2) and secure with a simple

overhand knot

N Coat the bearing bore in the rope

rotor with non-resinous oil

N Slip the rope rotor onto the starter

post (3) – turn it back and forth a

little until the anchor loop of the

rewind spring engages

Replacing the Starter Rope

and Rewind Spring

0012BA016 KN

0011BA022 KN

5902BA019 KN

146BA018 KN

0011BA025 KN

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

Pas de commentaire

Sharp R-201T Manuel d'instructions Page 29