Sharp SYSTEM 8/10 Plus Instructions d'exploitation télécharger pdf (Page 43)

Extron • System 8/10 P

LUS

• User’s Manual

Multiple Switcher Operation

5-4

Daisy Chain Configuration

Daisy Chain Example

The illustration below shows how System 8/10 PLUS units would be connected in

a Daisy Chain configuration. If System 10 PLUS units were used, the only

difference would be the input channel numbers.

_____ Important audio information! If audio connections are made balanced, there will

be +6 dB of gain. This gain must be offset with a pad, otherwise the maximum

input audio level could be exceeded on the audio input. This would result in

distortion. However, if audio connections are made unbalanced, there is no gain.

The audio attenuator(s)

on the last input of the

switcher(s) should be set

to 0 dB cut by turning

the attenuator clockwise

until it stops. This setting

will prevent the looped

input from affecting any

gain acquired from

preceding channels.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Pas de commentaire

Sharp SYSTEM 8/10 Plus Instructions d'exploitation Page 43