Sharp SYSTEM 8/10 Plus Instructions d'exploitation télécharger pdf (Page 38)

Extron • System 8/10 P

LUS

• User’s Manual

Controlling the Switcher

4-3

Miscellaneous

KEY CAP

CLEAR LEGEND

COVER

LEGEND

PLATE

The right side of the front panel has a removable cover for accessing setup

controls. This is explained in Chapter 3.

Button Labels

1. Remove the desired key cap from

the switcher by grasping the top and

bottom of the key cap and pulling it

away from the switcher.

2. Dismantle the button by prying the

clear legend cover from the key cap

base.

3. Label the button by using rub-on

letters on the white legend plate or by placing a small clear or white label

between the white legend plate and the clear legend cover.

4. Reinsert the key cap back into place on the switcher.

Front Panel Access Cover

The Front Panel has a cover that can easily be removed for configuring the

System 8/10 PLUS for different applications. Use a small screwdriver to release

the captive screws that hold the access cover on. Note that the cover has a label

on the inside that shows how to configure the switches. Chapter 3 has detailed

instructions for using this area.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 77 78

Pas de commentaire

Sharp SYSTEM 8/10 Plus Instructions d'exploitation Page 38