Sharp PC-9300 Guide de l'utilisateur télécharger pdf (Page 48)

Acquiring a Panoramic, TMJ x2 or Sinus Image

5–6 ACQUIRING PANORAMIC IMAGES

Launching the X-ray

To launch the x-ray, follow these steps:

1. Leave the x-ray room and close the door. You must keep visual contact with the

patient during acquisition.

2. Launch the x-ray with the remote control. Press and hold the exposure button until the

end of the acquisition is indicated by the on-screen “Release Switch” message. The

turns yellow and a warning sound is heard, indicating x-ray emission. When the

acquisition ends, the Panoramic Acquisition interface disappears and the acquired

image is automatically transferred to the Imaging window.

3. Check the image quality.

4. Do the following when the acquisition is finished:

 Open the temple supports and release the patient.

 Remove the hygiene barrier of the bite block.

 Reset the unit rotative arm for the next acquisition.

IMPORTANT

To stop the acquisition, if any problem, release the exposure

button of the remote control or press the red emergency stop

button.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Pas de commentaire

Sharp PC-9300 Guide de l'utilisateur Page 48