Sharp PC-9300 Guide de l'utilisateur télécharger pdf (Page 31)

Acquisition Interface

CS 9300 System User Guide (SM748)_Ed 01 3–15

“Select” 3D Acquisition Overview

The “Select” 3D Acquisition interface is the 3D interface for the CS 9300 that provides

you with a selected range of imaging acquisition functions.

Figure 3–14 “Select” 3D Acquisition interface

1 Information button:

 About: Identifies the Software and the Firmware versions.

 Reset of the Values: Resets to the manufacturing parameter settings.

 Memorize settings: Memorizes the user preference settings for each patient type (kV,

mA and voxel size).

 Save current mode as default: Sets the current selected program to be available by

default each time you access the Acquisition interface.

 Activate the Phantom mode: Sets the unit parameters to perform an image quality

control test.

2 Preview Screen:

 Before exposure: Displays an illustration of the selected FoV inside the anatomy.

 During exposure: Displays the acquired image in real time.

3 Selected Parameter Display: Displays the current acquisition parameter settings.

4 System Status Screen: Displays various alert or warning messages originating from the unit.

5 Generator Cooling indicator: Indicates the automatic cooling time (mm:ss) required for the

generator to reach 0 for a new acquisition.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 63 64

Pas de commentaire

Sharp PC-9300 Guide de l'utilisateur Page 31