Sharp PGC30XU Instructions d'exploitation télécharger pdf (Page 18)

E-17

Operation

Basic Operations

3 Rotate the zoom ring. The image can be adjusted

to the desired size within the zoom range.

4 Rotate the focus ring until the image on the screen

becomes clear.

5 Press INPUT to select the desired input mode.

Press INPUT again to change the mode.

EXAMPLE

INPUT 1 Mode

INPUT 2 Mode

INPUT 3 (VIDEO)

Mode

• When no signal is being received, “NO SIGNAL” will be

displayed. When a signal that the projector is not preset

to receive is being received, “NOT REG.” will be displayed.

6 Press VOLUME / to adjust the volume.

7 Press MUTE to temporarily turn off the sound.

Press MUTE again to turn the sound back on.

8 Press POWER OFF.

Press POWER OFF again while the message is

displayed.

• If you accidentally pressed POWER OFF and do not want

to turn off the power, wait until the power off screen

disappears.

• When POWER OFF is pressed twice, the POWER indicator

will light up red and the cooling fan will run for about 90

seconds. The projector will then enter standby mode.

• Wait until the cooling fan stops before disconnecting the

power cord.

• The power can be turned on again by pressing POWER

ON. When the power is turned on, the POWER indicator

and the LAMP REPLACEMENT indicator light green.

• The POWER indicator flashes if the bottom filter cover is

not securely installed.

PG-C30XU/CD (E)-c 00.5.19, 3:46 PM17

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 63 64

Pas de commentaire

Sharp PGC30XU Instructions d'exploitation Page 18