Sharp DT-200 Spécifications télécharger pdf (Page 33)

-33

Basic Operation

Placement of the Projected Image

Using the Keystone Correction

Place the projector at a distance from the screen that

allows

images to be projected onto the screen by referring

to “Screen Size and Projection Distance” on page 17.

: Screen area

Note

• The aspect ratio of the projected image also shifts

slightly when the “H Keystone” and “V Keystone”

functions are adjusted simultaneously.

• If you cannot correct trapezoidal distortion with

Keystone correction, change the placement

position of the projector.

1 Project the test pattern of the

Keystone correction function onto

the screen. Adjust the focus until

the image on the screen comes

into focus. (See page 30.)

ZOOM/FOCUS

END

ZOOM

FOCUS

Change the projection angle moving

the projector or using the adjuster to

properly project images onto the

screen. (See page 31).

Align the edge of the screen closest

to the projector with the test pattern

by adjusting the zoom and the

adjsuter. (See pages 30 and 31.)

ZOOM/FOCUS

END

ZOOM

FOCUS

Align

Adjust the Keystone function so that the

size of the projected image matches the

screen size. (See page 32.)

5 Align the image on the screen by

adjusting the zoom function and

the adjsuter.

ZOOM/FOCUS

END

ZOOM

FOCUS

6 Adjust the focus so that the projected

image is in focus at the center of the

screen. (See page 30.)

DT400_E_P27_35.p65 04.10.18, 1:18 PM33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 66 67

Commentaires sur ces manuels

Pas de commentaire

Sharp DT-200 Spécifications Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Projecteurs de données Sharp DT-200