Sharp DT-200 Spécifications télécharger pdf (Page 18)

-18

Setting Up the Projector

Projecting a Reversed Image

Projection from behind the Screen

■ Place a translucent screen between the projector and the audience.

■ Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 52.)

Projection Using a Mirror

■ Place a mirror (normal flat type) in front of the lens.

■ When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode”

menu. (See page 52.)

■ When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page 52.)

Info

• When using a mirror, ensure to carefully position both the projector and the mirror so the light does not

shine into the eyes of the audience.

Ceiling-mount Setup

■ It is recommended that you use the optional Sharp ceiling-mount

bracket for this installation.

■ Before mounting the projector, contact your nearest Sharp Au-

thorized Service Center or Dealer to obtain the recommended

ceiling-mount bracket (commercially available). (AN-CM270 ceil-

ing-mount bracket, AN-EP101B extension tube for AN-CM270.)

■ Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See

page 52 for use of this function.

Translucent screen

Audience

Set to “Front”

Audience

Tr anslucent screen

Mirror

Set to “Rear”

Audience

Mirror

DT400_E_P16_18.p65 04.10.18, 1:17 PM18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 66 67

Pas de commentaire

Sharp DT-200 Spécifications Page 18