Sharp AN-P12EX Spécifications télécharger pdf (Page 41)

-41

Stack Projection

The stack projection allows you to increase the brightness of an image by stacking two

projectors and projecting same image simultaneously.

Info

• To set up the stack projection, assign a projector as the master and the other projector as the slave and

connect the projectors with commercially available LAN cables (UTP cable, Category 5, cross-over type).

In this way, you can control the both projectors with one remote control.

• The buttons below can control both the master and the slave at one time.

• ON button • VOLUME buttons

• STANDBY button • AUTO SYNC button

• SHUTTER button • RESIZE button

• COMPUTER1/2, DVI, HDMI, • PICTURE MODE button

VIDEO, S-VIDEO buttons • BREAK TIMER button

• MUTE button • FREEZE button

• In normal operation, the projector set as the slave cannot be controlled by the remote control.

Only while the remote control is connected to the projector with a ø3.5 mm minijack cable (commercially

available or available as Sharp service part QCNWGA038WJPZ), the projector set as the slave can be

controlled by the remote control.

• Even while the projector is set as the slave, the buttons on the projector can be used.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 58 59

Pas de commentaire

Sharp AN-P12EX Spécifications Page 41