Sharp AR-160 Spécifications télécharger pdf (Page 59)

TROUBLESHOOTING

Printing is slow.

Simultaneous use of two or more application software

programs.

→ Start printing after quitting all unused application software

programs.

–

The printed image is light and

uneven.

The paper is loaded so that printing takes place on the

back side of the paper.

→ Some paper types have a front and back side. If the paper is

loaded so that printing takes place on the back side, toner will not

adhere well to the paper and a good image will not be obtained.

The printed image is dirty.

You are using paper that is outside the specified size and

weight range.

→ Use copy paper within the specified range.

Paper curled or damp.

→ Do not use curled or crimped paper. Replace with dry copy paper.

During periods when the machine is not used for a long time,

remove the paper from the tray and store it in a dark place in a

bag to prevent moisture absorption.

–

You did not set sufficient margins in the paper settings of

your application.

→ The top and bottom of the paper may be dirty if the margins are

set outside of the specified print quality area.

→ Set the margins in the software application within the specified

print quality area.

–

Problem Cause and solution Page

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

Pas de commentaire

Sharp AR-160 Spécifications Page 59