Sharp XV-Z9000E Spécifications télécharger pdf (Page 18)

Setup & Connections

Operating the Remote Control

The remote control can be used to control the projec-

tor within the range shown on the left.

• The signal from the remote control can be reflected off a

screen for easy operation. However, the effective distance

of the signal may differ due to the screen material.

Remote Control

45˚

7 m

30˚

45˚

30˚

Using the remote control in a dark

room

The backlights of the operation buttons can be turned

on for five seconds and off by pressing BACKLIGHT.

If you want to turn off the backlights while they are on,

press BACKLIGHT again.

BACKLIGHT button

Using as a Wired Remote Control

When the remote control cannot be used due to the

range or positioning of the projector (rear projection,

etc.), connect a 3.5 mm stereo minijack cable

(commercially available) from the wired remote control

jack on the top of the remote control to the Wired remote

control jack on the back of the projector.

3.5 mm stereo minijack cable

(commercially available)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 62 63

Pas de commentaire

Sharp XV-Z9000E Spécifications Page 18