Sharp PN-L702B Manuel d'instructions télécharger pdf (Page 44)

■ To set from a PC

WhenthemonitorisconnectedtoaPC,LANsettingscanbe

conguredviaPC.

Set up process

(1)ConnectyourmonitortoaPC

(2)SpecifythePC’sIPaddress

(3)Congurethemonitor’sLANsettings

(1) Connecting your monitor to a PC

ConnectacommerciallyavailablecrossoverLANcable

(UPTcable,Category5)totheLANportonthePCandthis

monitor.

LAN cable

(commercially available, crossover)

To LAN terminal

LAN terminal

(2) Specifying the PC’s IP address

Tocongurethemonitor’sLANsettings,youmusttemporarily

changethesettingsonthePC.

ThisexplanationisbasedonWindows7.

1. LogontothePCwithanadministratoraccount.

2. Click[Start],andthenclick“ControlPanel”.

3. Click“Viewnetworkstatusandtasks”in“Networkand

Internet”.

In“ClassicView”,click“NetworkandSharingCenter”.

4. Click“LocalAreaConnection”andthen“Properties”.

5. Click“InternetProtocolVersion4(TCP/IPv4)”andthen

“Properties”.

6. Make a note of the current IP address, subnet mask, and

default gateway settings.

Make sure you write this information now as you will

be changing the IP address, subnet mask, and default

gateway settings back to these settings afterwards.

7. Temporarily change the IP address and subnet mask.

To access the monitor as it is shipped from the factory, set

as follows.

• IPAddress:192.168.150.1

• SubnetMask:255.255.255.0

• DefaultGateway:(leaveblank)

8. Click[OK]andthenrebootthePC.

TIPS

• Thismonitorisfactorypresetasshownbelow.

(WhenDHCPCLIENTissettoOFF)

 IPAddress :192.168.150.2

 SubnetMask :255.255.255.0

 DefaultGateway :0.0.0.0

(3) Conguring the monitor’s LAN settings

AccessthemonitorusingInternetExplorer.

Controllingthemonitor

1. TurnthepowerONtothemonitor.

2. SetRS-232C/LANSELECTontheSETUPmenutoLAN.

3.SetDHCPCLIENTtoOFFinLANSETUPontheSETUP

menu.

PCoperation

4. LaunchInternetExplorer,inthe“Address”boxtype

“http://192.168.150.2/”andpresstheEnterkey.

You will be prompted to enter a user name and password.

5. Leavetheusernameandpasswordboxesblankandclick

[OK].

Controlling the Monitor with a PC (LAN)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Sharp PN-L702B Manuel d'instructions Page 44

Commentaires sur ces manuels

Produits connexes et manuels pour Moniteurs à écran tactile Sharp PN-L702B