Sharp AF-P80CX Manuel de service télécharger pdf (Page 20)

AF-P80CX

19. Unscrew the 1 screw holding the centrifugal fan. 20. Unscrew the 1 screw holding wire holder.

Unscrew the 3 screws holding fan motor.

DISASSEMBLING THE CONTROL BOX

1. Unscrew the 1 screw holding the control box cover.

CAUTION: DISCHARGE THE FAN MOTOR CAPACITOR

AND RUNNING CAPACITOR BEFORE

TOUCHING THOSE CAPACITORS OR OTHER

COMPONENTS OR WIRING.

4. Unscrew the 1 power supply cord grounding screw.

Unscrew the earth screw. Unscrew the 1 screw holding

the capacitor clamp and the fan motor capacitor.

2. Unscrew the 3 screws holding the printed wiring board.

5. Detach each connector by using long-noise pliers.

6. Unscrews the 2 screws holding the transformer and

remove the control board with unhooking the 2 spacers.

3. Cut the wire fixing bands holding the fan motor lead

wires, the compressor cord and the power supply cord.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Pas de commentaire

Sharp AF-P80CX Manuel de service Page 20