Sharp SF-1020 Manuel de service télécharger pdf (Page 19)

5 Avoid installation to a poorly ventilated place.

6 Avoid installation to a place where there are flammable materials

or ammonia gas, etc. If the machine is installed near a diazo

copier, the picture quality may be degraded and malfunctions may

occur.

7 Install near a power outlet.

(2) Space around the machine

Install the machine with its rear side about 10cm apart from the wall in

order to allow space to ventilation by the cooling fan.

Also allow enough space around the machine for proper operation.

(3) Installation base

Set the machine in horizontal position in the following procedure.

Be sure to use a leveling instrument (UKOGM0054CSZZ) to install

the machine on a flat, horizontal place.

(Note) If the machine is not in horizontal position, the toner density

control function may not work normally, resulting in degraded

picture quality.

(4) Power source

1 Use the power source of the rated capacity.

2 Avoid complicated wiring. If not, the breaker or the fuse may be

overloaded.

(5) Grounding wire connection

1 Connect the grounding wire to prevent against a danger.

2 When connecting the grounding wire, connect only to the ground-

ing object (the grounding terminal of the power outlet, etc.) and

never connect to a gas pipe.

Grounding

terminal

4 – 2

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 139 140

Pas de commentaire

Sharp SF-1020 Manuel de service Page 19