Sharp Mobilon HC-4000 Guide de l'utilisateur télécharger pdf (Page 32)

32 CHAPTER 4. CDPD CONNECTIVITY

Conﬁguring the PM100C

1. Insert your PM100C into the PCMCIA slot with the power turn off. Make sure

that your computer is on already and are running Windows 95.

2. Turn on the modem and wait for your PC to recognize that the PM100C has been

activated.

3. Windows 95 will detect the presence of your new modem and prompt you for

hardware drivers. Insert the diskette ”PM100C Utilities for Windows 95, Disk 1

0f 2” and select Driver from disk provided by Hardware manufacturer and then

click OK.

4. Click OK to load the driver.

5. Enter your area code and then click OK.

6. Launch the Progtool application. Select Start, Programs, PM100C, and then

highlight Progtool.

7. Enter the IP address provided by your CDPD carrier in Field 1 (NEI List). For

Example : 166.128.4.60

8. In API box, select SLIP

9. In the Registration box, select Automatic

10. Channel Set : A Prefered

11. In Sleep box, select Enable to reduce battery drain when modem is not in use.

12. Click save button to save your selections.

13. To verify your conﬁguration, click on Monitor (Start, Programs, PM100C).

14. Click on Connect. The connected indicator should darken.

4.6 Windows NT CDPD Modem Integration

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 56 57

Pas de commentaire

Sharp Mobilon HC-4000 Guide de l'utilisateur Page 32