Sharp AL-1655CS Spécifications télécharger pdf (Page 83)

TROUBLESHOOTING AND MAINTENANCE

A: Misfeed in the paper feed area

Gently remove the misfed paper from the paper feed area as

shown in the illustration. If the error indicator blinks and the

misfed paper is not visible in the paper feed area, pull out the

paper tray and remove the misfed paper. If the paper cannot be

removed, proceed to "B: Misfeed in the fusing area".

Close the side cover by pressing the round projections near

the side cover open button. The error indicator will go out and

the ready indicator will light up.

B: Misfeed in the fusing area

Lower the fusing unit release

lever.

The fusing unit is hot. Do not touch the fusing unit when

removing misfed paper. Doing so may cause a burn or other

injury.

• Do not touch the surface (green portion) of the drum cartridge when

removing the misfed paper. Doing so may damage the drum and

cause smudges on copies.

• If the paper has been fed through the bypass tray, do not remove the

misfed paper through the bypass tray. Toner on the paper may stain

the paper transport area, resulting in smudges on copies.

Warning

Caution

Fusing unit release lever

AL-1655CS.book 81 ページ２００４年８月２２日　日曜日　午後６時４４分

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 123 124

Pas de commentaire

Sharp AL-1655CS Spécifications Page 83