Sharp AL-1217 Spécifications télécharger pdf (Page 9)

Follow the installation procedure below to use the unit properly.

SETUP PROCEDURE

When using the unit for the first time, setup the unit following the procedure shown

below.

The multi-bypass tray is only included with the AL-1457.

If you are only using the unit for copying, skip this step.

If the unit does not function properly during setup or use, or if a function

cannot be used, see "TROUBLESHOOTING THE UNIT" (p.59).

1 Open the package, and make sure that all the accessories are

supplied with the unit. (p.8)

2 Remove the protective materials. (p.9)

3 Install the TD cartridge. (p.10)

4 Load the paper in the paper tray (p.15) or the multi-bypass

tray*

(p.17)

5 Connect the power cord

. (p.12)

8 Now, you can copy (p.46), print (p.33), or scan (p.35) your

document.

7 Connect the interface cable*

(p.45) and turn on the unit. (p.12)

6 Install the software.*

(p.19)

SETTING UP THE UNIT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 85 86

Pas de commentaire

Sharp AL-1217 Spécifications Page 9