Sharp R-310BK Manuel de l'opérateur télécharger pdf (Page 18)

ADJUST PEELER PLATE AS FOLLOWS

1. Using the provided 9/64” Allen wrench just loosen – DO NOT REMOVE -

the two 8-32 SHCS located on the left side of the peeler assy. (see “C” in

Fig 12)

2. Using a 5/32” Allen wrench just loosen – DO NOT REMOVE - the two 10-

32 SHCS located to the right of the peeler assembly (see “D” in Fig 12).

3. Adjust the peeler plate.

4. Re-tighten all screws.

Fig 12

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 52 53

Pas de commentaire

Sharp R-310BK Manuel de l'opérateur Page 18