Sharp R-205M Manuel de l'opérateur télécharger pdf (Page 27)

Great Plains Mfg., Inc. Table of Contents ► Section 1: Assembly

1/22/2005 Series VII 6330-6548 Field Cultivator, Floating Hitch 560-205M

Gauge Wheel Assembly

U-bolt the gauge wheel bracket (1) to

the front bar of inside wing brace as shown in

Figure 14 using the 5/8 x 4 x 4 1/4 u-bolts (2),

lock washers and hex nuts. Slide the gauge

wheel arm/hub assembly (3) up into the gauge

wheel bracket (1) and pin with the 3/4 x 4 1/2

pin (4). Use four 1/2 x 1 hex bolts (5) to

secure the arm and make it rigid. Bolt on the

4-bolt rim and tire (6) with four 1/2 x 1 lug

bolts (7). For directions on the proper setting

for the gauge wheel during operation, refer to

section 4.

Figure 14

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 61 62

Pas de commentaire

Sharp R-205M Manuel de l'opérateur Page 27