Sharp R-32STM Fiche technique télécharger pdf (Page 25)

CAN: Controller Area Network Lab using ST STM32 Cortex-M processors. www.keil.com

CAN Waveform:

This is an oscilloscope photo of a CAN frame from our example.

The first negative edge is the SOF (start of frame). The last negative pulse is the ACK bit. It moves about due to stuffed bits.

The first five positive pulses stay the same. They are the ID field. The others change as the data field and CRC change.

The most narrow pulse is 2 µsec wide and ½ µsec =

500 kHz. This is the CAN frequency in our example.

The base is 0.665 volts and the top is at 3.0 volts.

The P-P voltage is ~ 2.375 volts positive going.

Remember this is not a valid CAN physical layer.

You will not be able to connect this to a real CAN

network. If you did, I expect there will be many bus

errors created. But as you can see, it is very useful

for small experimental networks.

Data Tracing: a practical debugging example… (for reference only)

1. This is an example ran on a particular Cortex-M3 board. Val_Tx is displayed in the Logic Analyzer (LA).

2. The variable CAN_RxMsg[0].data[0] is also displayed in the Logic Analyzer as shown here:

3. With the program running, the potentiometer was

varied which varied val_Tx. The screen displayed

the value of val_Tx in real-time as shown here in the

Logic Analyzer:

If you think this graph doesn’t reflect what you think a pot

rotated should look like you are correct ! The pot on this

particular board is defective (it has many bad spots) and I

have saved it for demonstrations like this. This problem was

not apparent by turning the pot and watching the LCD.

However, watching the data writes in the Trace Records

reveals what is really happening. See in the Data column as I

rotate from 77 to C1 there is a short drop down to the 30s – this in one of the bad spots and this is why the graph has the

sharp jumps. This problem was confirmed with a CAN analyzer attached to the bus and an oscilloscope on the pot.

Usefulness of Serial Wire Viewer (SWV):

This is one example of the usefulness of Serial Wire Viewer. It could be otherwise very difficult to find this problem with

without Serial Wire Viewer. There are many instances SWV is useful and here are a few examples:

Another good use is finding interrupts that fire too often using up CPU time and slowing your program down. I saw this once

where the developer thought he had disabled the DMA. The DMA interrupts in the Exceptions window told a different story.

Once he actually disabled the DMA and made its interrupts stop, his program ran much faster.

Viewing variables that do not exist in the real world and only in formulae and variables (and therefore cannot be measured

with instruments) is another good example.

The data displayed by SWV (except for the Debug (printf) Viewer) is non-intrusive and no CPU cycles are stolen.

ETM Trace:

ETM trace, available with nearly all ST STM32 processors, captures and displays all the instructions executed. It works in

conjunction with SWV. ETM is extremely useful in program flow problems or when the processor “goes-into-the-weeds”.

ETM also provides Code Coverage, Performance Analysis and Instruction Execution capabilities. A Keil ULINKpro is

needed to collect ETM trace frames from the STM32 Trace Port. See www.keil.com/appnotes/docs/apnt_230.asp

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31

Commentaires sur ces manuels

Pas de commentaire

Hunter fan 40120 Bedienungsanleitung (28 Seiten)

Marke: Hunter-fan | Kategorie: Control panel | Größe: 1.11 MB |

Inhaltsverzeichnis

Electronic/Mechanical

Thermostat

RH / R / VR / 4

INSTALLING THE THERMOSTAT

Wall Plate

INSTALLING THE WALL PLATE

HE/HG Switch

HG for a gas

Note: In

Span Adjust

Is there help on the web?

Can’t I just call someone?

2-wire Heat Only Sys tem

Weitere Produkte und Handbücher für Schalttafel Hunter-fan

Modelle	Dokumententyp
47550	Bedienungsanleitung Hunter Fan 47550 User Manual, 38 Seiten
43168	Bedienungsanleitung Hunter Fan 43168 User Manual, 21 Seiten
44372	Bedienungsanleitung Hunter Fan 44372 User Manual, 45 Seiten
44665	Bedienungsanleitung Hunter Fan 44665 User Manual, 2 Seiten
44033-01 44277	Bedienungsanleitung Hunter Fan 44033-01 44277 User Manual, 37 Seiten
44760	Bedienungsanleitung Hunter Fan 44760 User Manual, 28 Seiten
44905	Bedienungsanleitung Hunter Fan 44905 User Manual, 54 Seiten
44127	Bedienungsanleitung Hunter Fan 44127 User Manual, 37 Seiten
43255	Bedienungsanleitung Hunter Fan 43255 User Manual, 7 Seiten
44110	Bedienungsanleitung Hunter Fan 44110 User Manual, 52 Seiten
43154	Bedienungsanleitung Hunter Fan 43154 User Manual [en] , 7 Seiten
43153	Bedienungsanleitung Hunter Fan 43153 User Manual, 2 Seiten
44050	Bedienungsanleitung Hunter Fan 44050 User Manual, 24 Seiten
43355	Bedienungsanleitung Hunter Fan 43355 User Manual, 43 Seiten
47300A	Bedienungsanleitung Hunter Fan 47300A User Manual, 44 Seiten
40135	Bedienungsanleitung Hunter Fan 40135 User Manual, 30 Seiten
47350A	Bedienungsanleitung Hunter Fan 47350A User Manual, 23 Seiten
44260	Bedienungsanleitung Hunter Fan 44260 User Manual, 104 Seiten
44377W	Bedienungsanleitung Hunter Fan 44377W User Manual, 64 Seiten
PH20-30A	Bedienungsanleitung Hunter Fan PH20-30A User Manual, 26 Seiten

Sharp R-32STM Fiche technique Page 25

Commentaires sur ces manuels

Hunter-fan 40120 Handbücher

Hunter fan 40120 Bedienungsanleitung (28 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Schalttafel Hunter-fan

Sharp R-32STM Fiche technique Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour Micro-ondes Sharp R-32STM

Hunter-fan 40120 Handbücher

Hunter fan 40120 Bedienungsanleitung (28 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Schalttafel Hunter-fan