Sharp VC-488NS Manuel de service télécharger pdf (Page 34)

Chapter 2 - Installation

Mounting the GPS Receiver

The GPS Timing Receiver is designed for integral mounting within a

standard 19 inch telecommunications equipment cabinet.

Mounting in Equipment Cabinets

Two integral mounting flanges are provided on the ends of the front

panel of the unit. All cable connections are made at the rear of the

Timing Receiver. Refer to Figure 2-11.

Figure 2-11: Typical Mounting in Cabinet

It will not normally be necessary to install any cooling fans into the

cabinet containing the GPS Receiver. However, refer to the Technical

Specifications where installations are to be subjected to high ambient

temperatures.

GPS Timing Receiver Installation and Operation Manual

2-16

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 66 67

Pas de commentaire

Sharp VC-488NS Manuel de service Page 34