Sharp LC-15M4U Instructions d'exploitation télécharger pdf (Page 25)

EXAMPLE OF APPLICATION

Mounting the LCD monitor on a wall

Note:

■ Consult with your dealer and authorized shop before installation. (Various materials are used for wall. Some materi-

als may not be strong enough or thick enough to hold the mounting screws in place or support the weight of the set.)

1 Drill holes measuring 0.3 in. (8 mm) in

diameter on the wall (hollow wall, plaster

board).

2 Insert the supplied anchors into the holes,

and strike the heads of the anchors with a

hammer until the anchors are securely

installed in the wall.

Note:

■ The supplied anchor screws are inserted in

anchors. Remove the screws from the anchors

before installation.

3 Position the supplied wall mount bracket in

place using the anchor screws. Tighten the

anchor screws securely.

CAUTION: • The wall mount bracket must be

installed with four anchor screws.

Be sure to thighten so that it will

not fall down under a pulling

force of at least 44 lbs (20 Kg).

• The anchors are designed for

plaster boards with a thickness

of 0.5 in. (12.5 mm). For a 0.4-

in. (9.5 mm) thickness board or a

wooden wall, find similar anchors

or screws at a hardware store.

4 Mount the back stand of the main unit on the

wall mount bracket with the supplied fixed

screw.

* To change the vertical angle of the

monitor, tilt the screen up to 8°

downward. Adjust the angle of the

monitor for the most comfortable

viewing.

0.3 in. (8 mm) ø

1.6 in. (40 mm)

4.3 in. (110 mm)

Anchor

(Supplied)

Anchor Screw

(Supplied)

Wall Mount

Bracket

(Supplied)

0.5 in. (12.5 mm)

Fixed Screw (× 1)

(Supplied)

Wall Mount Bracket (× 1)

Anchor and Screw (× 4)

LC-15M4U(20-28)Eng.p65 01.7.24, 5:17 PM24

1 2 ... 20 21 22 23 24 25 26 27 28 29

Commentaires sur ces manuels

Pas de commentaire

Sharp LC-15M4U Instructions d'exploitation Page 25

Commentaires sur ces manuels

Produits connexes et manuels pour TV LCD Sharp LC-15M4U