Sharp PC-MM1 Manuel d'utilisateur télécharger pdf (Page 80)

5-8

Network Setup Utility

With the Network Setup Utility, you can set up your specific network settings

adjusted for your environments such as work, home, etc. and select the appropriate

one to the environment. You can also change the network settings.

• Not every setting item can be stored.

• The Network Setup Utility may not compliant with all network

environments.

Loading Network Settings

To set your specific network settings, confirm that your computer is connected into

the network and has the proper settings for your current environment and follow the

instructions below.

1. Click start – All Programs – SHARP Network Setup Utility – SHARP Network

Setup Utility.

2. Click OK.

3. Click Set, select SHARP icon or Windows icon, then, click Select icon button.

4. Select an icon and click OK. Type a network name, then, click OK. The selected

icon appears in the Network Setup Utility window.

It takes a moment to load the network settings.

Switching Network

To switch the network set above, confirm your computer is ready to connect into the

network and follow the instructions below.

1. Click start – All Programs – SHARP Network Setup Utility – SHARP Network

Setup Utility.

2. Click OK.

3. Select the appropriate network icon in the Network Setup Utility window.

4. Click OK.

• Make sure your computer is connected to the proper environment.

• If your hardware or software configuration has been changed, you may

not be able to switch to the network properly. In this case, you may

need to reconfigure the settings.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 122 123

Pas de commentaire

Sharp PC-MM1 Manuel d'utilisateur Page 80